31. August 2009 by admin.

Cool video on YouTube at http://www.youtube.com/watch?v=-uJn18FqzMo

This is a DIY version of a Development board that works with 40pin MCU by Microchip.Like the 18F452 and the 16F877A.It has :ICSP, MikroElektronika ICD connector, RTC Real Time Clock, Two Relays,DS18B20 Temperature sensor, Buzzer, RS232 Interface PORT outs

Posted in Do It Yourself (DIY), Development Tool | 1 Comment »

25. August 2009 by admin.

AWC Electronics is proud to offer a full line of PAK modules that add the features you need to nearly any microprocessor. Need more I/O, floating point math, PWM, or servo control? A PAK can not only add those features, but it also saves your valuable development time and scarce processor resources — and that saves you money! They also offer kits, software, and other tools for working with microcontrollers and programmable logic.

Posted in AWC Electronics, Free Shipping | 1 Comment »

23. August 2009 by admin.

It’s going to be at the JW Marriott again. Hopefully, all attendees will get the same discounts that we got this year - and free samples too.

Posted in Training & Education | 1 Comment »

20. August 2009 by admin.

Get it at http://www.muvium.com/

 The uVMDEM-SBC65EC DEV BOARD is an ideal low cost development board for web centric muvium applications based on the Modtronix SBC68EC board.  The board ships with the muvium bootloader pre-installed

Features

• Delivered with  muvium enabled 40Mhz PIC18F6627 CPU
• Onboard 24LC512 EEPROM
• 98 KBytes Flash, 3936 Bytes SRAM and 64 Kbytes EEPROM.
• Has space for a 8 pin Ramtron SPI FRAM chip (32Kbyte FM25256 chip for example) to be assembled on the bottom of the board.
• 32 user programmable I/O pins. They can be monitored, configured and updated via web pages.
• 12 user programmable, 10 bit Analog to Digital converters. They can be monitored, configured and monitored via web pages.
• Red user LED on PIC port RB6.
• Green LED for Link indication.
• Yellow LED to indicate transmit or receive activity.
• RS232 interface via 3 pin connector or Frontend board. The supplied serial port cable can be used to connect to the serial port of a target DTE device (comm port of a personal computer for example)
• Modular, it has the following MicroX connectors(For details seewww.modtronix.com.au/microx/expansion)
  • Compact Daughter Board connector.
• Conforms to standard MicroX Compact Main Board dimensions (58mm wide and 54mm high). For details see www.modtronix.com.au/microx/dimensions.
• 2.1mm power connector for standard DC transformer.
• Wide operating voltage range from 7 – 35V.
• Assembled with 10BaseT Ethernet and RS232 interface with +- 15kV ESD protection.
• Easily build web applications with the Muvium TCP/IP stack, that features:
  • Includes MAC, IP, ARP, ICMP, TCP, UDP, HTTP, DHCP, IP Gleaning,
  • Socket support for TCP and UDP
  • Full TCP state machine

Posted in Uncategorized | 1 Comment »

17. August 2009 by admin.

Microchip PIC In-Circuit Debugger MPLAB-ICD1B from http://microcontrollershop.com/product_info.php?cPath=112_152&products_id=1856

Fully assembled and tested Microchip PIC In-Circuit Debugger and Programmer

This low-cost development tool providing real time emulation of the PIC16F87x microcontrollers with built-in ICD feature. The board is fully compatible with Microchip’s free MPLAB integrated development environment and is a complete lower-cost replacement of Microchip’s MPLAB-ICD1 In-Circuit Debugger. Note: Only MPLAB versions 5.40 and earlier support the ICD1.

As future device offerings become available, you simply download new software into the PIC-ICD1 at no cost and without the need of hardware upgrades.

Using Microchip’s proprietary In-Circuit Debug functions, programs can be downloaded, executed in real time and examined in detail using the debug features of MPLAB. Watch variables and breakpoints can be set from symbolic labels in C or assembly source code, and single stepping can be done through C source line, assembly code level, or from a mixed C source and generated assembly-level listing. PIC-ICD1 can also be used as a development programmer for PIC MCUs supported by MPLAB’s programming function.

PIC In-Circuit Debugger Features

• Real-time background debugging
• MPLAB IDE compatible (v5.40 and earlier)
• Firmware upgradable from PC
• Supports low-voltage MCUs (2.0 to 6.0 range)
• Diagnostic LEDs (Power, Busy, Error)
• Reading/Writing memory space & stack of target microcontroller
• Erase of program memory space with verification
• Freeze on Halt

This product does not ship with any documentation or software. It functions the same as Microchip’s MPLAB-ICD1, but uses a different PIC ICSP connector (top view). For a complete list of supported PIC microcontroller devices, see the release notes for your version of MPLAB. The newest versions of MPLAB do not support the ICD1. The latest version with ICD1 support is Version 5.40. You can also download the schematic diagram of this product for more information.

Ships from: USA
Leadtime: In stock

Posted in ICD, Microcontroller Pros Corporation, Debugger, MPLAB | 1 Comment »

12. August 2009 by admin.

Promotion applies for All Access Pass Holders w/ Hardware Packages only. Use source code ESCBROOM at https://www.cmpevents.com/ESCe09/a.asp?option=B 

Posted in Tradeshows, Free Stuff, Limited-time Offer | 1 Comment »

10. August 2009 by admin.

Get it here: http://www.weedtech.com/software.html:

By far, the most painless way to communicate with the Stackable Data Modules is to use ModCom; a GUI-based HMI development tool designed specifically for these modules and written for the Windows™ operating system. Regardless of whether you plan on using ModCom as your final operational platform, or if your needs require a custom program, ModCom is so easy to use that most customers turn to it as a starting base to get a feel for the Stackable Data Modules’ functionality, communications protocol, and features.

Posted in Wheeler Technologies, HMI | 1 Comment »

6. August 2009 by admin.

USB Development Bundle - HIDFS, USBBOOK, LABXUA, PPUSB, U2C, 840Z, 2-4550, 2550, 10CAB, ACX, 2-UCAB from microEngineering Labs!

Includes:

• HIDmaker FS Software
• USB Complete by Jan Axelson
• LAB-XUSB Experimenter Board
• PICPROTO USB Prototyping Board
• melabs U2 Programmer in Plastic Case
• Programming Adapter for 8-40 Pin (840Z)
• (2) PIC18F4550 microcontrollers
• PIC18F2550 microcontroller
• 10-pin ICSP Cable
• AC Adapter for LAB-X Board
• (2) USB cables

$999 at http://www.cippsites.com/Merchant4/merchant.mvc?Screen=PROD&Product_Code=HIDBUN&Category_Code=NEW&Store_Code=melabs 

Posted in Prototyping, Inc., microEngineering Labs, Programmer, Complier, USB, Software Stack, 8-bit | 1 Comment »

4. August 2009 by admin.

Get it at http://sourceforge.net/projects/picfloat/

Posted in GNU General Public License (GPL), SourceForge, Software Stack | 1 Comment »