Get it at [1] http://www.muvium.com/

 The uVMDEM-SBC65EC DEV BOARD is an ideal low cost development board for web centric muvium applications based on the Modtronix SBC68EC board.  The board ships with the muvium bootloader pre-installed

Features

• Delivered with  muvium enabled 40Mhz PIC18F6627 CPU
• Onboard 24LC512 EEPROM
• 98 KBytes Flash, 3936 Bytes SRAM and 64 Kbytes EEPROM.
• Has space for a 8 pin Ramtron SPI FRAM chip (32Kbyte [2] FM25256 chip for example) to be assembled on the bottom of the board.
• 32 user programmable I/O pins. They can be monitored, configured and updated via web pages.
• 12 user programmable, 10 bit Analog to Digital converters. They can be monitored, configured and monitored via web pages.
• Red user LED on PIC port RB6.
• Green LED for Link indication.
• Yellow LED to indicate transmit or receive activity.
• RS232 interface via 3 pin connector or Frontend board. The supplied serial port cable can be used to connect to the serial port of a target DTE device (comm port of a personal computer for example)
• Modular, it has the following MicroX connectors(For details see[3] www.modtronix.com.au/microx/expansion)
  • Compact Daughter Board connector.
• Conforms to standard MicroX Compact Main Board dimensions (58mm wide and 54mm high). For details see [4] www.modtronix.com.au/microx/dimensions.
• 2.1mm power connector for standard DC transformer.
• Wide operating voltage range from 7 – 35V.
• Assembled with 10BaseT Ethernet and RS232 interface with +- 15kV ESD protection.
• Easily build web applications with the Muvium TCP/IP stack, that features:
  • Includes MAC, IP, ARP, ICMP, TCP, UDP, HTTP, DHCP, IP Gleaning,
  • Socket support for TCP and UDP
  • Full TCP state machine