Save up to 40%: End of Year Dev Tool Sale on Now

29. November 2011 by admin.

From: http://www.microchip.com/en_us/promo/yes2011/index.html

Use promo code YES2011 on microchipDIRECT to save on the following tools:

MPLAB^® ICD 3 In-Circuit Debugger

DV164035   $189.99

NOW $151.99

The MPLAB^® ICD 3 In-Circuit Debugger system is Microchip’s latest and most cost-effective high-speed emulator for Flash dsPIC^® Digital Signal Controller (DSC) and PIC^® microcontroller (MCU) devices. It debugs and programs with the powerful, yet easy-to-use MPLAB^® IDE graphical user interface. This debugger provides significant performance enhancements for embedded systems designers. Programming times are typically 15x faster than previous systems. A 40 MHz dsPIC33 and high-speed FPGA yield faster communications, downloads and debugging. For further technical descriptions, refer to www.microchip.com/icd3.

 

PICkit™ 3 Debug Express

DV164131               $69.99

NOW $55.99

The PICkit™ 3 allows affordable debugging and programming of PIC^® microcontrollers (MCUs) and dsPIC^® Digital Signal Controllers (DSCs) using the powerful graphical user interface of the MPLAB^® Integrated Development Environment (IDE). This kit includes the 44-pin demo board with a PIC18F45K20 microcontroller, a USB cable, and a CD that includes the user’s guide, tutorials and free software.

 

PIC32 Ethernet Starter Kit

DM320004              $72.00

NOW $55.00

The PIC32 Ethernet Starter Kit contains everything needed to begin development for Ethernet and USB Host/Device/OTG applications with the PIC32 microcontroller family. The board contains an RJ45 Ethernet connector, an on-board programmer/debugger, full size USB host connector, and USB Micro-B connector. The kit ships with an Ethernet cable and USB cables for each connector. Free design documentation, development software and code examples can be obtained from the Ethernet starter kit web page. The board also contains an expansion header for expanding development with boards such as the I/O Expansion Board (DM320002), Multimedia Expansion Board (DM320005) or a board created on your own.

 

Microstick for dsPIC33F and PIC24H

DM330013              $24.99

NOW $18.00

The Microstick for dsPIC33F and PIC24H is the perfect solution for those looking for a low-cost, easy-to-use 16-bit development platform. The USB-powered kit includes an on-board debugger/programmer and a DUT socket for easy device swapping. This kit also comes with the dsPIC33FJ64MC802 and PIC24HJ64GP502 devices.

 

Multimedia Expansion Board

DM320005              $249.99

NOW $150.00

The Multimedia Expansion Board (MEB) provides PIC32 Starter Kit, dsPIC33E USB Starter Kit or PIC24E USB Starter Kit users with an integrated yet flexible solution for development of high impact user interfaces. The board comes with a 3.2″ Color TFT touch-screen QVGA display, an on-board FCC certified WiFi^® module, a 24-bit stereo audio code, a three-axis accelerometer, a joystick and a MicroSD memory card slot.

 

MPLAB^® Starter Kit for PIC24F MCU

DM240011              $59.98

NOW $47.98

The PIC24F Starter Kit contains everything needed to experience the high performance and versatility of the PIC24F microcontroller family. It includes an on-board debugger, USB device and host connectors, a tri-color LED, a capacitive touch pad and an OLED display. Menu driven demonstration software supports data logging, thumb drive and graphics applications.

 

Accessory Development Starter Kit for Android™

DM240415              $79.99

NOW $65.00

The Microchip PIC24F Accessory Development Starter Kit For Android™ is a stand-alone board used for evaluating and developing electronic accessories for Google’s Android operating system for smartphones and tablets. It consists of the 16-bit PIC24F PIC^® MCU-based development board and a software library available via free download.

 

XLP 8-bit Development Board

DM240313              $125.00

NOW $80.00

The XLP 8-bit Development Board provides a low-cost, highly configurable development system for Microchip’s new line of eXtreme low power 8-bit PIC18F or PIC16F Enhanced core microcontrollers that allow for design of sleep currents down to 20 nA. The board supports development for the PIC18F87K22 or PIC16LF1947 MCUs, which highlight the capabilities of each product family.

 

F1 Evaluation Platform

DM164130-1          $39.99

NOW $31.99

The F1 Evaluation Platform is a demonstration/development tool for Enhanced Mid-Range PIC^® microcontrollers (PIC12F1XXX/PIC16F1XXX). Populated with a PIC16LF1937 featuring XLP technology, this platform consists of a 44-pin development board with prototyping space, 3V LCD glass, support for the motor control add-on (coming soon), and support for the PICkit™ 3 debugger and PICkit™ Serial Analyzer. This kit provides a platform for general purpose development, and includes demonstrations focusing on low power, LCD and motor control.

 

Motor Control Starter Kit with mTouch™ Sensing

DM330015              $89.99

NOW $71.99

The Motor Control Starter Kit with mTouch™ Sensing is a complete hardware and software tool suite for evaluating Microchip’s ultra-low cost motor control family of dsPIC^® DSCs. It contains a single board with a BLDC motor, capacitive-touch sliders and a built-in debugger.

 

MCP1640 Synchronous Boost Converter Evaluation Board

MCP1640EV-SBC  $19.99

NOW $15.99

This evaluation board uses the MCP1640 in a high-efficiency (up to 96%), fixed frequency (500MHz), step-up DC-DC converter.

• Easy-to-use and minimum number of external components power supply solution for applications powered by one-cell, two-cell, or three-cell alkaline, NiCd/NiMH; one-cell Li-Ion or Li-Polymer batteries
• Selection of the best operating mode for efficiency (PWM/PFM)
• A wide input voltage range (0.35 to 5.5V) and low start-up voltage (0.65V)
• PCB layout recommendations for SOT23-6 and 2×3 mm-8 DFN packages
• Three common output voltages to evaluate: 2.0V, 3.3V and 5.0V enable selection (when disabled, the MCP1640 disconnects the path from input to output for “true disconnect”)

 

High Voltage Buck Converter 600 mA Demo Board

ADM00352             $19.99

NOW $15.99

The board demonstrates the MCP1640 in two boost-converter applications with multiple output voltages.

• Output Voltage set to 3.3V
• 600 mA Output Current
• Input Voltage Range 4V to 30V with 40V Transients
• EN Input Test Point

 

MCP16301 300 mA D2PAK Demo Board

ADM00360            $14.99

NOW $11.99

Demo board supporting the development of MCP16301 high input voltage, 300mA, D2PAK buck converter.

• Output Voltage set to 3.3V
• 300 mA Output Current
• Input Voltage Range 4V to 26V
• EN Input Test Point
• Minimal Board Space Solution, Smaller than D2PAK Outline

 

MCP2200 USB to RS232 Demo Board

MCP2200EV-VCP  $23.99

NOW $19.99

The board demonstrates the MCP2200 USB to UART in an RS232 configuration. Additionally, the supplied software can be used to configure special features of the device.

• Powered via USB
• Test points for all GPIO pins
• RS232 device and 9-pin D-sub connector for connecting to RS232 applications
• Tx and Rx LEDs for indicating USB to UART traffic (when enabled)
• Software for configuring special features of the device

Posted in 16-bit, 8-bit, 32-bit, Limited-time Offer, microchipdirect, Development Tool | Print | 2 Comments »

LV-32MX v6 Development System is available now with 20% discount

10. August 2011 by admin.

LV-32MX v6 Development System is available now with 20% discount (expires 9/30/11)

V-32MX v6 by MikroElektronika is a full-featured development system used for developing and testing PIC32 MCU applications. With numerous built-in modules, such as TFT Color Display (320×240) with Touch Screen, Stereo Codec, CAN, Serial Flash, Serial EEPROM, and many others, the LV-32MX v6 development system offers many multimedia features for developing advanced graphic, audio, memory, and storage applications.

• 64 and 100-pin PIC32MX MCUs are supported on removable MCU cards (PIC32MX460F512L included)
• MMC/SD card slot for removable flash storage
• 85 LEDs indicate the logic state on all microcontroller pins
• 85 push buttons to excite microcontroller inputs
• All MCU pins routed to IDC10 connnectors for further expansion
• System can be easily configured by means of DIP switches

Use coupon code TPZM9K6 at http://www.microchipdirect.com/ProductSearch.aspx?keywords=TMIK002

Posted in MikroElektronika, LED, Serial EEPROM, Graphics, CAN, Limited-time Offer, 32-bit, Development Tool | Print | 1 Comment »

Easy24-33 v6 Development System is available now with 20% discount

4. August 2011 by admin.

Easy24-33 v6 Development System is available now with 20% discount (expires 9/30/11) 

The Easy24-33 v6 is a general purpose development system for low pin count PIC24 MCUs and dsPIC DSCs. It accepts DIP packages from 14 to 28 pins and comes with a 24F16KA102 installed. Includes a boatload of on-board peripherals, integrated programmer/debugger and a large prototyping area. Demo versions of Mikro C, Basic, and Pascal compilers are included (6K program limit); the system is also compatible with MPLAB compilers and debuggers. This is the “Swiss army knife” of 16-bit development boards.

Features include:

• Every I/O pin connected to push button and LED
• I/O pins configurable with pull up/down resistors
• 2×16 character LCD w/ backlight
• Capacitive touch keypad
• 2 potentiometers
• Serial SRAM (64 Kbit) w/ SPI interface
• Serial EEPROM (1 Kbit) w/ I2C interface
• CAN transceiver and temp sensor
• UART/USB converter
• Connectors for USB, RS-232, and all port pins
• Large prototyping area
• Demo versions of Mikro C, Pascal, and Basic compilers (6K program limit)
• Supports optional ZigBee transceiver module (MRF24J40MA)

 

Use coupon code TPXM9L7 at http://www.microchipdirect.com/ProductSearch.aspx?keywords=TMIK006

Posted in MikroElektronika, 16-bit, Limited-time Offer, Development Tool | Print | 1 Comment »

Hurry 20% Dev Tool Coupon from Microchip exprires tomorrow! (From ESC)

14. October 2010 by admin.

Use code ESCB2010 at Checkout on http://www.microchipdirect.com/ 

Offer expires on 10/15/10

Posted in Limited-time Offer, Development Tool | Print | 1 Comment »

ESC Coupon Code: 20% Off

5. May 2010 by admin.

Now through May 31, 2011. Get 20% off any Microchip dev tool on MicrochipDIRECT when you use coupon code ESCSV2010 at checkout.

 Did you go to the show? What’d you think?

Posted in Tradeshows, Limited-time Offer, Development Tool | Print | 1 Comment »

20% Off Dev Tool coupon expires 4/2/10

26. March 2010 by admin.

Use code MCHPMETER at http://www.microchipdirect.com/ to geta 20% Off any Dev Tool. Offer expires on 4/2

Posted in Limited-time Offer, microchipdirect, Development Tool | Print | 1 Comment »

Save 20% off select 8-bit boards from Microchip

2. February 2010 by admin.

Thru June 30, 2010. 

PICkit 3 Debug Express (DV164131)
PIC18 Starter Kit (DM180021)
F1 Starter Kit (DM164130-1) 

Go to www.microchip.com/easy for details.

Posted in 8-bit, Debugger, PIC, Limited-time Offer, Microchip, Development Tool | Print | 3 Comments »

20% off PICkit 3 or PIC18 Starter Kit

20. November 2009 by admin.

From http://www.microchip.com/stellent/idcplg?IdcService=SS_GET_PAGE&nodeId=2867

Offer ends 12/31/09.

Posted in 8-bit, 16-bit, 32-bit, Limited-time Offer, Microchip | Print | 1 Comment »

Cash for Dev Tool Clunkers!

20. September 2009 by admin.

Check out http://www.microchip.com/cfc/

Trade in your old development tool clunker for a new one from Microchip!

 

Announcing the “Cash for Clunkers” development-tool exchange program, offering you a cost-effective way to do your part for the environment and get better mileage with Microchip. After all, Uncle Sam isn’t offering the electronics industry any bailouts; so Microchip thought it would stimulate better designs by giving embedded engineers an attractive incentive to trade up for more sleek and modern development tools.

 

Microchip’s Cash for Clunkers program allows embedded designers who are tired of looking at the faded paint jobs on their old tools to exchange selected models from Microchip’s competitors for savings up to 30%—up to a $120—on select PIC® Microcontroller, memory and analog development tools (see Web site for details). But you’d better act fast—the program ends on October 30, 2009. Of course, Microchip will dispose of all exchanged competitor tools in an appropriate manner.

 

Move up to Microchip and send us your Atmel, TI or Freescale development tool** and receive up 30% off the following Microchip development tools:

·         Starter Kit for PIC18F

·         Starter Kit for PIC24F

·         Starter Kit for PIC24H

·         PIC32 Starter Kit

·         Starter Kit for Memory Products

·         PICkit™ 3 Debug Express

·         PIC18 Development Kit (includes PICkit™ 3)

·         MPLAB^® ICD 3 Evaluation Kit (Includes PICDEM™ 2 Plus)

·         MPLAB^® ICD 3 and Explorer 16 Kit

 

In addition, you will receive a 20% discount off any of Microchip’s analog development tools.

 

Simply complete the form to register for this promotion. You will receive a confirmation Email with details on how to return your tool back to Microchip and when you will receive your discount coupons. This form needs to be completed for each tool you wish to return as part of this limited-time offer.

Posted in 8-bit, Programmer, Debugger, PIC, 16-bit, Microchip, Limited-time Offer, 32-bit, Development Tool | Print | 1 Comment »

Register Now for ESC Boston & get one FREE room night at the at the Park Plaza.

12. August 2009 by admin.

Promotion applies for All Access Pass Holders w/ Hardware Packages only. Use source code ESCBROOM at https://www.cmpevents.com/ESCe09/a.asp?option=B 

Posted in Tradeshows, Free Stuff, Limited-time Offer | Print | 1 Comment »